with a shitty 1.96 60ft I went 12.05 @ 118mph no nitrousso I think I am going to try and put the cage in this week so I can go out again next week and try for that 11 second slip!
Results 1 to 10 of 18
Thread: Got the boot at speedworld
Hybrid View
-
01-10-10, 11:05 AM #1Senior Member
- Join Date
- Apr 2008
- Location
- Phoenix
- Posts
- 390
Got the boot at speedworld
2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
-
01-10-10, 11:59 AM #2Senior Member
- Join Date
- Oct 2008
- Location
- Buckeye, Az
- Posts
- 586
which cage you getting? MM or custom?
-
01-10-10, 02:15 PM #3Senior Member
- Join Date
- Nov 2008
- Location
- Phoenix
- Posts
- 175
the track sucked last night ,,,,but good run i ran after u with a 12.05 @116 w/2.0 60 ft ...
03 motor w/stage 3 cams ,JLT c.a.i,BBK o/r X pipe,Tri-Ax,C.C U/L flywheel ,
Competition Clutch, I.R.S 31 spline w/4:10's,SCT tuner,Eibach sport line,tokico, .....
NEW set up
S/C 17psi 462HP 505TQ....
11.76@116 1.63 60ft.
-
01-10-10, 05:53 PM #4Senior Member
- Join Date
- Apr 2008
- Location
- Phoenix
- Posts
- 390
its a MM but its been customized. it bolts in where the back seat would be but instead I will have a rear seat delete with holes for the cage. Hopefully it will look good in there!
Originally Posted by SloSVO
ya it sucked bad! I will be there next week but not until after work, around 7 or 8 Originally Posted by az2k1
2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
-
01-10-10, 05:27 PM #5Senior Member
- Join Date
- Nov 2006
- Location
- Scottsdale
- Posts
- 750
Nice!
2011 Shelby GT 500
Black/Black/Satin Black Stripes, Electronics Pkg, FRPP/BMR Suspension/Borla-Ford Racing Exhaust
488rwhp/463rwtq bone stock
Great Past Rides:
2003 Mustang Cobra SVT Convertible- 302 Stroker & more- PSR Tuned, 2003 Mustang GT- Silver Coupe w/boltons
1996 Mustang GT/SC- Paxton SC & Tons of Mods- SuperFord Mag Car, 1995 Mustang- Red w/boltons. 1968 Galaxie 500
-
01-10-10, 06:09 PM #6Senior Member
- Join Date
- Oct 2008
- Location
- Buckeye, Az
- Posts
- 586
get to work buddy!!! hehe...
-
01-10-10, 07:20 PM #7Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Bolt in cross bar is not NHRA legal and will not pass tech.
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
-
01-10-10, 10:40 PM #8Senior Member
- Join Date
- Apr 2008
- Location
- Phoenix
- Posts
- 390
you are the 2nd person who has told me this. Last night I showed the picture to 2 different "tech's" at speedworld and they said it will pass just fine. Also the guy I bought it from used it at firebird and never had a problem.. Originally Posted by BurnTire
Should I just have the cross bar welded in?2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
-
01-11-10, 01:11 PM #9Senior Member
- Join Date
- Mar 2009
- Location
- Phoenix, DFW or a trailer at the track
- Posts
- 944
Bus driver is correct. Originally Posted by silvrsvt
You have it welded in, it will be fine.WILD BILL
PRO-AMERICAN
TorchRed 2003 MACH1 (Louise)
"I remember my fallen brothers so that they may live on."
ΜΟΛΩΝ ΛΑΒΕ
-
01-11-10, 01:32 PM #10Administrator
- Join Date
- Dec 2005
- Location
- Pittsburgh, PA
- Posts
- 8,619
Pretty nice office for a bus driver Originally Posted by WildBill@PSR
Sold
2004 Cobra, Whipple ,TH-400
Burning Corn
9.97 - 135.5
Reply With Quote