I'm running 697 hp here in Germany
I'm running 697 hp here in Germany
Where in germany? I'm in Wiesbaden and pushing 630 with meth.
Stuttgart
We've met but it has been a long time ago. In Landstuhl at the helicopter shoot.
Last edited by 03whitecobra; 07-11-10 at 07:55 AM. Reason: clar
I was not there had to of been someone else. I remember that event though
there is a guy around here making 770rwhp on a stock 03/04 motor(3.4 whipple and 25psi E-85) hell he even drives it about 2,000 miles a month
TuksonMike ^ Sounds like hes itching for more power too.
Over the past 5 years Ive been perusing all the Cobra forums and there are more than a handful of Cobra long blocks making over 1000 to the wheels with stock internals. The tune and the fuel is the key to it though. Weak point in the motor is the pistons
More:
Stock motor, compund boost making 948rwhp on the stock motor1. It's not the block that's the problem... a prepped stock block will live at over 1200 horse...
2. the pistons don't shatter... they are forged 4032 pistons they are very strong...
3. The failures that are piston related are generally due to the outrageously tight piston to wall clearance... which elevated cylinder temps from...
hot spot induced detonation, lean detonation, too much timing detonation, and just old school over heating... cause them to try to seize to the walls!!!
4. Sustained wide open throttle passes(high speed roll races) of 30 seconds or more, or BANZAI 5th gear top end pulls.. will also tax the fuel delivery and heat removal systems of otherwise well tuned modified cars.
850rwhp stock motor compound boost
1020rwhp stock motor compound boost
914rwhp stock motor compund boost
http://www.modularfords.com/forums/s...nd-performance)