Any of you out there know what a stock blower terminator would run in the 1320 with a 100 shot of spray and maybe some times for a stage 5 ported eaton with a 100 shot. or any squeez combos.
Results 1 to 10 of 30
Thread: terminator with squeez!!!!!!!!
Hybrid View
-
12-06-09, 11:10 AM #1Member
- Join Date
- Jan 2009
- Location
- goodyear, arizona
- Posts
- 67
terminator with squeez!!!!!!!!
-
12-06-09, 12:26 PM #2Senior Member
- Join Date
- Apr 2008
- Location
- Phoenix
- Posts
- 390
well IF I could keep a clutch in my car I could tell you what a 4,000lb vert runs with a stock blower on a 100shot. I can tell you with a 1.8 60ft I went 12.0 @ 115, I am hoping with the 100 shot I can go 11.30-11.40 @ 121-122
2003 SRT4 12.29@109.36 SOLD
2003 Cobra 12.00@119 SOLD
2004 Cobra vert 12.05@118
-intake, exhaust, pulley
2007 Mustang GT 13.66@102
-JLT CAI
-Bama tune
-JBA axle back
-
12-06-09, 01:20 PM #3Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
well, my car is a stage 4 ported, and runs the number in my sig, and has more in it, but the whole "no cage" part gets me booted everytime.
-
12-21-09, 02:10 AM #4Senior Member
- Join Date
- Feb 2008
- Location
- Chandler AZ
- Posts
- 504
Still flirting with the 10's?
Originally Posted by AZSonicSnake
Black 04 Cobra
KB 2.2 @ 19#'s, 3.25(15#) upper, 4# lower, CAI, Kooks LT's, Catted H,
SLP LM1 CB, 60# inj, BF idlers, BF TB, Zoom ZVT Stage 3, 26 Spline, MGW,
2400 MAF, Ron Davis Racing HE, SCT tune, AFS 10.5, 315/35/17
Originally Posted by wickedcobra
-
12-21-09, 10:34 AM #5Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
honestly, have only been to the track once this year with the cobra, and that was back in feb. dang.. i need to get out more!!! Originally Posted by About2Bite
Still flirting with the 10's?
-
12-17-09, 04:33 PM #6Senior Member
- Join Date
- Oct 2008
- Location
- Buckeye, Az
- Posts
- 586
Sonic, what size shot, if any, to run those times? you solid axle?
-
12-18-09, 12:43 AM #7Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
yes, i do have a solid axle. the suspension on my car coupled with the amazing tune, and a little bit of driver mixed in, is what makes it run the times it does, and trap just a hair over 129. and i am NOT spraying any nitrous at all. Originally Posted by SloSVO
-
12-18-09, 08:54 AM #8Senior Member
- Join Date
- Oct 2008
- Location
- Buckeye, Az
- Posts
- 586
what gears you running? and what is your drag wheel set up?
-
12-18-09, 08:55 AM #9Senior Member
- Join Date
- Apr 2006
- Location
- North Phoenix
- Posts
- 4,184
running a 3.90 gears, and i hit the traps at about 6300 in 4th. for wheels, i run a set of prostars. 15x3.5 and 15x10 out back. as for tire, i have been running a 26x10 et drag slick.
-
12-18-09, 08:58 AM #10Senior Member
- Join Date
- Oct 2008
- Location
- Buckeye, Az
- Posts
- 586
you run the bolt-on spacer for the skinnies?
Reply With Quote
