PDA

View Full Version : Parting out 2004 cobra



Dan
08-13-09, 09:07 AM
This is a 2004 black cobra with 3500 miles, yes that is right 3500 miles never wrecked or damaged, the car was being built for a silver state car but the car never was finished, I have had it for 2.5 years here at the shop. TI have a clean clear title for this car. i will not sell it complete it will be broke up in parts and sold off i have itemized everything, this car has not started not ran with these parts what so ever. So 90% of this car is New.

the clutch is a twin disk 26 spline clutch this has 100 miles on it it drove from one shop to our shop. 850.00

G-Force T-56 new it has never been ran nor does it even have fluid in it yet. 5200.00

DFI stand alone new in the box never used. 2000.00

5.1 billet stroker, Oliver rods , custom pistons, custom crank, arp 2000 studs, comedic head gaskets, ported heads , 1mm over sized valves, custom comp billet cams, cantom oil pan, billet oil pump, all new. This motor is ready to go. custom blacck valve covers and black timing cover, 13,500 for motor complete ready to run

Stop tech brakes 355mm complete kit lines rotors and calipers the rotors are 2 piece 100 miles on them they are black in color 1800.00

Turbo kit
this is a custom this has turbonetics ball bearing turbo. tial waist gates, Mari dyne cooling fans, PSR K member , MM coil overs, complete stainless exhaust all the way to the rear axle, Sullivan intake with sheet metal intake, all new 11000.00

Rolling chassis
this is going to be a shell with dash and int panels both front fenders and all of the 04 cobra body panels along with folding mirrors, all int wiring will be in the car as it has never been removed, it will consist of enough parts that you will be able to put wheels under it and roll it on to a trailer. all head lights bumper covers will all be intact, a stock hood will be on the car it may or may not be the color of the car. this car has a clean car fax, No dents no dings title in hand. 11,000 as a chassis


Fluidyne radiator 250.00

Maximum motorsports 6 point roll bar with diagonal bar and removable door bars power coated black 400.00

9 inch curry rear end all 31 spline Detroit true track, strange aluminum 3rd member with the aluminum bearing support, with all brake brackets to fit mustang rear brakes 2500.00

Custom drive shaft for a 9 inch to a viper spec G force yoke 300.00

caster camber plates 150.00 4 bolt set up

maximum anti roll bar note this is a weld on unit and it is currently welded on to the 9 inch but we can remove it. 300.00 by its self or 250 with the rear end


maximum motorsports rear control arms with out spring perch. 220.00

pan hard rear bar maximum motor sports 250.00

electric water pump 200.00


there are many more parts on the car than this please pm me. remember 90 % of this car is new and the other stuff has less than 3k miles on it. If you have a question just ask

98WhiteSteed
08-24-09, 02:03 AM
Interior color?

WildBill
08-24-09, 07:30 AM
Interior color?

Ummmmmm........Black.

Dan
08-24-09, 03:13 PM
any one interested ??

kbstang
09-21-09, 10:37 PM
will the fluidyne fit a foxbody?

Dan
09-22-09, 09:33 AM
no it will not

98WhiteSteed
09-22-09, 01:58 PM
Will the seats fit a '98?

Dan
09-23-09, 11:21 AM
yes they will but they are gone

5.0Stanger
11-24-09, 05:57 PM
About the clutch: Is it still available? Who is the manufacturer? What's it rated for? What 26-spline input do I need for it? Does it include the flywheel? Do I need to get a specific T/O bearing for it?

Thanks.

WildBill
11-24-09, 06:30 PM
The car is gone.

El Jefe
11-24-09, 06:32 PM
Congrats! He drop off another project?

5.0Stanger
11-24-09, 06:51 PM
Thanks for mentioning that, Bill. I know the ad is only 60 days old, but (for those that don't frequent the site) posting an update would've been nice.

Thanks anyway.

WildBill
11-24-09, 08:03 PM
Congrats! He drop off another project?

WHo?

El Jefe
11-25-09, 11:07 AM
WHo?
Thought the owner of the Cobra had a newer Stang he wanted built? Could be mistaken....

WildBill
11-25-09, 06:18 PM
Thought the owner of the Cobra had a newer Stang he wanted built? Could be mistaken....

nope