Cherrypicker

[99WhiteGT]

Anyone have a cherrypicker that i could borrow or rent? I need to put in my new poly motor mounts. Or is there another way to do it without one? thx

[4Jenna]

I have one you can use, but i am way on the west side.

Chris

[99WhiteGT]

Sorry had to go out of town unexpectadly...um where in the west valley, cause i work in centralish phoenix

[White90GT]

I'm up at Power / Brown if you don't feel like taking the ride out to Chris's.

[4Jenna]

I'm way out by speedworld in surprise

[99WhiteGT]

oh i see, i used to work out that way, yea its far, but i just decided to use a huge floor jack and a 4x4. Now its up on stands and i got the big bolt out on the one side and the two connecting it to the block but i cant seem to get a wrench on the other one. does anyone have any ideas or do ideas of a diff tool that might be helpful that would be awesome.

[Mr. Austin]

When i was doing mine (mine is a 69 so its prolly a lot different) i put my car on a lift put an oil pan jack under the motor and lifted the motor just enough to change the mounts.

[99WhiteGT]

Yea mines up on jack stands and i got a big floor jack with 4x4 supporting the motor under the oil pan, just since i have long tube headers its hard to get to the back bolt on the motor mount, i will try to take picks later, i just cant get a normal wrench on it....any ideas?

[Mr. Austin]

ahh i c. when i did mine i didnt have my headers on. i took them off. i also have more room to work with then you...