PDA

View Full Version : flywheel torque 03 to 99


99redcobra
05-14-06, 10:32 PM
ok help what do i topque the 03 flywheel to on my 99 cobra
50 BMG
05-14-06, 11:00 PM
Torque spec?

Call Akuma or Dan I know they have the manuals.
Lucafu1
05-15-06, 04:18 AM
tight, worked for me for years
50 BMG
05-15-06, 09:29 AM
gudentight...(german torque spec) :mrgreen:
Lucafu1
05-15-06, 02:32 PM
gudentight...(german torque spec) :mrgreen:

exactly!

but after working on acft/helos for 6 years my arm is always calibrated
matt
05-15-06, 03:29 PM
This should cover everything..

"Syncromesh Transmission Fluid - Friction Modifier" GM part #12377916

DEXRON III? (ATF) Transmission Fluid
XT-2-QDX DEXRON III?

Pressure plate-to-flywheel bolts 4.6L (4V) 33 lb-ft + 60?
Transmission to clutch adapter housing bolts 26 lb-ft
bellhousing-to-block bolts are torqued to 55 ft/lbs.
PP bolts to like 25-30 ft-lbs

Flywheel to crank ---- 63 ft lbs
PP to flywheel ------- 33 ft lbs plus 60 degrees more
Bellhousing to block--- 55 ft lbs
Trans to bellhousing -- 26 ft lbs

Trans front cover ---- 26 ft lbs could be called adapter, or input shaft
retainer (removed to change input shaft)
Trans rear ext hsing -- 26 ft lbs

I German torque everything.........Good-en-tite