Jared@Lethal
04-30-08, 10:01 AM
NEW@LETHALPERFORMANCE
Another amazing product from our good friends over at Fore Precision will make it's way to the market next week. This new hat was specifically designed to house 2 Walbro GSS342 Pumps as well as a return line. Pricing for these is $440.00 and they will be shipping from Lethal Performance in about 1 week. If you'd like to pre-order one we ask that you give us a call so we can put you on the list and you will not get charged until the item is in stock and ready to ship.
Please let us know if you have any questions regarding this or any of Fore Precision Works products.
Thanks, Jared
http://www.lethalperformance.com/pages-productinfo/product-17794/fpw-dualwalbropumpsn95-fore-precision-works-03-04-cobra-dual-walbro-pump-billet-hat.html
http://img138.imageshack.us/img138/1107/gss342ff3.jpg
Fore Precision Works 03-04 Cobra Dual Walbro Pump Billet Top Hat
If you haven't seen one of Fore Precision Works products you can't even imagine the level of quality they have. So we're here to give you the newest and baddest piece ever released onto the mustang market by Fore Precision Works
This all new billet top hat made by Fore Precision Works is the cutting edge of fuel system upgrades for the 03-04 Cobra's. CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. Offered in 2 different styles you can be sure that this hat will meet your need for a higher quality and more efficient top hat modification
Dual 8an Outlets- One of the outlets is 2 feed lines Y'ed and the other -8 outlet is for the return line.
-Oversize pump retainer for Walbro GSS342 pumps, snap on electrical connectors for pumps, and AN -8 fitting for return port
-Accommodates Dual Walbro GS342 pumps as well as wiring for Single or Dual FPDM's (Fuel Pump Driver Module)
-Direct replacement and bolts right in using an OEM gasket for a perfect seal as well as using the OEM fuel sending unit in the same stock location.
-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.
-Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your Ford GT pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.
-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.
-All assemblies are pressure tested prior to shipping.
The top hat includes:
# CNC Machined & Anodized Top Hat Assembly
# All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump
# Oversize pump retainer for Walbro GSS342 pumps, snap on electrical connectors for pumps, and AN -8 fitting for return port
# Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump
# All XRP an Fittings
# New Bolts for mounting the assembly to the fuel tank
Note: The Top hat assembly when purchased alone does not include: Fuel Pumps, Fuel Level Sender or OEM Gasket. These are items which can be reused from your stock hat assembly or purchased seperately.
The Fore Precision Works top hat can be purchased by itself or as a fully assembled fuel system along with pumps, lines, rails, Modifed FPDM or Dual FPDM with wiring harness.
Another amazing product from our good friends over at Fore Precision will make it's way to the market next week. This new hat was specifically designed to house 2 Walbro GSS342 Pumps as well as a return line. Pricing for these is $440.00 and they will be shipping from Lethal Performance in about 1 week. If you'd like to pre-order one we ask that you give us a call so we can put you on the list and you will not get charged until the item is in stock and ready to ship.
Please let us know if you have any questions regarding this or any of Fore Precision Works products.
Thanks, Jared
http://www.lethalperformance.com/pages-productinfo/product-17794/fpw-dualwalbropumpsn95-fore-precision-works-03-04-cobra-dual-walbro-pump-billet-hat.html
http://img138.imageshack.us/img138/1107/gss342ff3.jpg
Fore Precision Works 03-04 Cobra Dual Walbro Pump Billet Top Hat
If you haven't seen one of Fore Precision Works products you can't even imagine the level of quality they have. So we're here to give you the newest and baddest piece ever released onto the mustang market by Fore Precision Works
This all new billet top hat made by Fore Precision Works is the cutting edge of fuel system upgrades for the 03-04 Cobra's. CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. Offered in 2 different styles you can be sure that this hat will meet your need for a higher quality and more efficient top hat modification
Dual 8an Outlets- One of the outlets is 2 feed lines Y'ed and the other -8 outlet is for the return line.
-Oversize pump retainer for Walbro GSS342 pumps, snap on electrical connectors for pumps, and AN -8 fitting for return port
-Accommodates Dual Walbro GS342 pumps as well as wiring for Single or Dual FPDM's (Fuel Pump Driver Module)
-Direct replacement and bolts right in using an OEM gasket for a perfect seal as well as using the OEM fuel sending unit in the same stock location.
-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.
-Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your Ford GT pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.
-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.
-All assemblies are pressure tested prior to shipping.
The top hat includes:
# CNC Machined & Anodized Top Hat Assembly
# All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump
# Oversize pump retainer for Walbro GSS342 pumps, snap on electrical connectors for pumps, and AN -8 fitting for return port
# Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump
# All XRP an Fittings
# New Bolts for mounting the assembly to the fuel tank
Note: The Top hat assembly when purchased alone does not include: Fuel Pumps, Fuel Level Sender or OEM Gasket. These are items which can be reused from your stock hat assembly or purchased seperately.
The Fore Precision Works top hat can be purchased by itself or as a fully assembled fuel system along with pumps, lines, rails, Modifed FPDM or Dual FPDM with wiring harness.