Hoosier Drag Radials

[About2Bite]

These are by far the best performing drag radial I have ever seen. I just replaced the GSD3's with them the other day and they hook like crazy. Anyone who doesn't drive in the rain should give these a shot. My GSD3's broke loose at 70 on the highway the other day in 3rd at WOT and scared the s*** out of me and these Hoosiers hook in second with no problem :pinkthumb:

Here are some pics, I decided to go with the white lettering out to give it a more agressive look. I like :woot1:

http://i249.photobucket.com/albums/gg213/KB2004Cobra/P1020127.jpg

http://i249.photobucket.com/albums/gg213/KB2004Cobra/P1020131.jpg

http://i249.photobucket.com/albums/gg213/KB2004Cobra/P1020137.jpg

http://i249.photobucket.com/albums/gg213/KB2004Cobra/P1020133.jpg

:beerchug:

[wickedcobra]

what size are they? what did they cost you?

I like the white out too!

[About2Bite]

They are 315/35/17's and I found them at LethalPerformance.com for $195 each, they retail for over $300 so I couldn't complain lol

Josh

[04WhininCobra]

I have the same question as wickedcobra. They do look VERY nice!

[04WhininCobra]

so im guessing you have a solid rear axle then?

[wickedcobra]

No thats an IRS

[04WhininCobra]

well what size are the wheels then cause i have heard a tire that big wont fit.

[About2Bite]

Not too many mods to the rear.
Still running IRS, 3/8" spacers, AFS 10.5" wheels

I have not lowered the car nor have I shaved the IRS bolts. I have no problems with the tires rubbing with this set up, and these tires are WIDE.

Josh

[sinspawn7]

they look bad ass!

[About2Bite]

they look bad ass!

Thanks man, you going to the Pavs this Sat??

[sinspawn7]

im goin to the berg show and the mesa main street cruise this saturday u should check it out!:pinkthumb:

[04WhininCobra]

well i have some 10.5 cobra wheels with nitto 555R on my 04 GT, do you think they will fit my cobra?

[AZSonicSnake]

dammnnn!! love it. lookin good.

[wickedcobra]

well i have some 10.5 cobra wheels with nitto 555R on my 04 GT, do you think they will fit my cobra?

When I had my IRS I was running 305/35/18s with a stock set up IRS, with no issues

[04WhininCobra]

well to get the ones that are on my GT to fit because i just got them so it will be a waste of 1200 dollars!

[About2Bite]

Thanks for the compliments guys


well i have some 10.5 cobra wheels with nitto 555R on my 04 GT, do you think they will fit my cobra?

You can more than likely fit a 315 on there with the spacer like I did, although there are many guys running 315's who had to shave the IRS bolts to allow for the clearance, or just go with the low profile MM bolts. If your Cobra is lowered you will have an ever better chance of getting them to fit on there with no issues, I am at stock height.

Josh

[wickedcobra]

If you have to replace the bolts it will only take less than 1 hour. Put the ones on the GT on the Cobra and call it good.

[wickedcobra]

Oh and once again those Hoosiers look killer........wanting them already and I dont need tires yet. Maybe time to go burn them off LOL

[04WhininCobra]

alright thanks for the input you guys, im going to have to buy some 3/8 spacers on. I guess whoever buys my GT is stuck with the stock wheels!!:sticktonge:

[wickedcobra]

I have some spacers here at the house you can have if you want

[Ruckus46gt]

great tires but they last less the et streets only downside. They hook like crazy

[krazyazian]

Looks killer man! Definitely get an IRS brace on there. Saw a guy blow his diff apart at SIR the end of last year.

[AZSonicSnake]

last less than et streets? yikes! they don't last 5k even..haha..

[About2Bite]

Looks killer man! Definitely get an IRS brace on there. Saw a guy blow his diff apart at SIR the end of last year.

Already have one, Steeda IRS brace FTW :yes:

[About2Bite]

Longevity is definately not their strong point lol

[BurnTire]

My BFG's only lasted 500 miles. I don't know why?:biglaugh:

Nittos 1,500

[wickedcobra]

My BFG's only lasted 500 miles. I don't know why?:biglaugh:

Nittos 1,500


Must have been the crooked rear end :laughing:

[AZSonicSnake]

i was wonderin when it was off the jack stand long enough..hahaha...i feel the ban stick comin..hahahaha...

[BurnTire]

i was wonderin when it was off the jack stand long enough..hahaha...i feel the ban stick comin..hahahaha...

LOL. My ride is on the rubber now.

[About2Bite]

My BFG's only lasted 500 miles. I don't know why?:biglaugh:

Nittos 1,500

That's why I don't buy used tires :snicker:

[04WhininCobra]

That would be awesome! Do you want anything for them?

[wickedcobra]

That would be awesome! Do you want anything for them?

Nah, just let me know when you want to get them. Im in the east valley off Power Rd.

[04WhininCobra]

Nah, just let me know when you want to get them. Im in the east valley off Power Rd.

when are you available during the week?

[About2Bite]

Nice to see you helping other guys in the area out like that Wickedcobra :beerchug:

[About2Bite]

im goin to the berg show and the mesa main street cruise this saturday u should check it out!:pinkthumb:

I have to work until 6 on Sat but what time is the show from and when does the cruise start?
If I can i'll make it over there :pinkthumb:

Sent you a PM

Josh

[krazyazian]

Already have one, Steeda IRS brace FTW :yes:
Damn my slanted eyes, I didn't see it in your pic of the back of the car showing the exhaust.

[wickedcobra]

Nice to see you helping other guys in the area out like that Wickedcobra :beerchug:

Thats how I roll :hyper: :3gears:

04whinin-Thursdays and Fridays are good for me. I will be at Firebird tonite....

[04WhininCobra]

[quote=04whinin-Thursdays and Fridays are good for me. I will be at Firebird tonite....[/quote]

I may be going to Mexico for spring break and i will be back on friday so that might work. Ill send you a PM to make set plans. Thanks again!