PDA

View Full Version : new build


Blownsvt
02-27-08, 09:14 PM
well it has been a while since i was last on this site, and alot has happend since then. I scorched a cylinder last year and was looking at boring the block and rebuilding the motor. while i was at it i figured why not go turbo while i am at it. so I did, the build is still in progress and should be ready in about 2-3 weeks. i also did away with the IRS in favor of a ford 9" from moser with 3.25 gear ratio and 35 spline axles. replace the complete fuel system including the tank in favor of a system from aeromotive with 96lb injectors. here is the present mod list. there could be some things i am missing.

2003 cobra
hellion t-76 single turbo s-trim .96AR BB
aeromotive eliminator return fuel system
sumped tank
96lb injectors and driver module
sct 3000 maf
99/01 powdercoated intake manifold
Moser Ford 9" solid rearend
motor bored .20 over
cp 17cc dished pistons and rings
steeda tri-ax with mgw handle
accufab twin 62mm throttle body.
35 spline axles
3.25 gears
upgraded drive shaft and yoke
bilstein shocks/struts
metco upper and lower control arms
sct ba3000
front mount intercooler
AEM widebang A/F gauge
AEM tru-boost guage with manual boost control built in
aeroforce interceptor gauge
raptor shift light
ngk tr6 plugs
upgraded head studs and gaskets
upr k-member
26 spline input shaft
stailness steel TOB retainer
steeda clutch quadrant
steede firewall adjuster
nitto 555r's on the street wheels

heres some pics of the build from basically the beging when the motor was out till now.

http://img.photobucket.com/albums/v609/nmdolan11/carparts013.jpg
http://img.photobucket.com/albums/v609/nmdolan11/carparts015.jpg
http://img.photobucket.com/albums/v609/nmdolan11/turbo2.jpg
http://img.photobucket.com/albums/v609/nmdolan11/metcocontrolarms.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000006.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000005.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc051.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc050.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000007.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000008.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000009.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000010.jpg
http://img.photobucket.com/albums/v609/nmdolan11/P1000004.jpg
http://img.photobucket.com/albums/v609/nmdolan11/DBPics104.jpg
http://img.photobucket.com/albums/v609/nmdolan11/DBPics100.jpg
http://img.photobucket.com/albums/v609/nmdolan11/DBPics102.jpg
http://img.photobucket.com/albums/v609/nmdolan11/DBPics101.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc032.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc039.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc045.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc052.jpg
http://img.photobucket.com/albums/v609/nmdolan11/misc053.jpg
BurnTire
02-27-08, 09:33 PM
Nice project. What ET are you hoping to run?
Blownsvt
02-27-08, 09:35 PM
hoping to break into the 9's but that won't happen right away, no cash left for my new race wheels and slicks. and i need to get a cage in it first as well.
The Nunn's
02-27-08, 09:37 PM
wow the build looks great man. dont you think 96's are a lil much, are you planning on running 28lbs+ boost? tuning will be a lil difficult on that 3k maf, we have ran into like 4 or 5 3k maf that have been FUBAR from the get go, tuning for drivabilty will be an issue and idle too, well best of luck to you on your bulid:pepper:
BurnTire
02-27-08, 09:38 PM
wow the build looks great man. dont you think 96's are a lil much, are you planning on running 28lbs+ boost? tuning will be a lil difficult on that 3k maf, we have ran into like 4 or 5 3k maf that have been FUBAR from the get go, tuning for drivabilty will be an issue and idle too, well best of luck to you on your bulid:pepper:

Did you stay at a holiday inn express last night?:biglaugh:
The Nunn's
02-27-08, 09:39 PM
hoping to break into the 9's but that won't happen right away, no cash left for my new race wheels and slicks. and i need to get a cage in it first as well.

we have a few cars out here in AZ running that set up and they're in the low 11's on 19psi
BurnTire
02-27-08, 09:40 PM
we have a few cars out here in AZ running that set up and they're in the low 11's on 19psi

Humm I am in the Mid 10's on a 19PSI Whipple.
Belts Rule.
The Nunn's
02-27-08, 09:41 PM
Did you stay at a holiday inn express last night?:biglaugh:

ok what does that mean MR. bus driver
Blownsvt
02-27-08, 09:42 PM
did 96's because i may bump up to a y2k88 at some point and i will need them for that setup at 30psi+

on this turbo i am going for about 25-26 psi which should net between 800-850 rwhp on good fuel.

we are going with the 3000 for now because my tuner has another car that is using one and it has been easy to tune and idels and drive fine right at 1000rwhp. we do have 2800 units in stock at the shop as well so if it becomes an issue it will be a quick change.
The Nunn's
02-27-08, 09:43 PM
Humm I am in the Mid 10's on a 19PSI Whipple.
Belts Rule.

all hail belts...maybe you should go to 25psi and maybe step it up a lil
Blownsvt
02-27-08, 09:43 PM
we have a few cars out here in AZ running that set up and they're in the low 11's on 19psi


well here in MN mark with the identical t-76 t-56 went 10.007 so i am aiming to beat that.

more recently with the 88 and an auto he went 8.95 @154
ASUSMC
02-28-08, 08:26 AM
Build looks awesome man! Wish I could afford something like that. I do have a couple questions.

Are TR6's going to be enough plug for that kind of psi?
What clutch was that I didn't see it in your list?
Blownsvt
02-28-08, 08:41 AM
Build looks awesome man! Wish I could afford something like that. I do have a couple questions.

Are TR6's going to be enough plug for that kind of psi?
What clutch was that I didn't see it in your list?


not sure on the plugs, thats just what i had in the car from my ported eaton set-up.

the clutch is the RAM street dual 300 series.
Graham
03-05-08, 12:59 PM
not sure on the plugs, thats just what i had in the car from my ported eaton set-up.

the clutch is the RAM street dual 300 series.

Hey man where you getting tuned in MN? Just askin cause I'm from there. I'm down in Az right now but moving back soon
Blownsvt
03-05-08, 07:03 PM
I do all my tuning at DB Performance in Rogers, Mn they are right off of hwy 101.

whare abouts in Mn are you from?
wickedcobra
03-05-08, 10:22 PM
Looks sweet. Why didnt you go with a TT set up? Easily makes 900-1k HP and 9s no problem
Blownsvt
03-06-08, 09:37 AM
so does a y2k88, fist off this is a little cheaper route, secondly i was told they there are some issues with getting 2 67mm turbos to sppol simotaneously with a 4.6 motor. this way i should be fully spooled by 3500 rpm or so and will have a solid power band. cna always switch to twins later if i want to i guess.
wickd03
04-02-08, 03:45 AM
we have a few cars out here in AZ running that set up and they're in the low 11's on 19psi
thats it? and on 19 lbs. :biglaugh:
BLK03SVT
04-02-08, 06:48 PM
Nice build man- can't wait to see the finished product and times.
Gene
04-02-08, 09:41 PM
Best for me on the stock block with the hellion kit @17lbs was 11.1 @ 133. I ran 17" mt dr's and stock chromies up front with an amazing 2.0 60'. There's a lot left in it, just havn't had the time to turn up the boost and run it at the track. FYI, the NGK BR7EF plugs at .025 run great in my car. I was having bad spark blowout with the supplied NGK TR6's. Your going to love the turbo, good choice.
Blownsvt
04-09-08, 07:18 PM
updates almost done should be running again in the next 24 hrs.

http://img.photobucket.com/albums/v609/nmdolan11/Mustang008.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang009.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang010.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang011.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang012.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang013.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang014.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang015.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang016.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang017.jpg
http://img.photobucket.com/albums/v609/nmdolan11/Mustang018.jpg
BurnTire
04-09-08, 08:13 PM
Looking Good.
wickedcobra
04-09-08, 09:45 PM
I bet your foaming at the mouth about now....
Blownsvt
04-09-08, 09:47 PM
yeah should be running in the next day or so.