New Gen @ Whipple Ho Install

[sicksnake]

Hey guys i just had the new gen whipple installed with all the supporting mods, will get pics up tomorrow and dyno vid.

[BurnTire]

How did the dyno numbers turn out?

[wickedcobra]

Its sooo purdy.....:pinkthumb:

[sicksnake]

Hey bro thanks for posting pics, ill have dyno vids up later, car made 640 hp and 589 tq on 11/6 ratio and 18 degree timing on a street tune:woot1:Car is violent and dead on. I made about 6 pulls, i would really like a day to drive and datalog. I think i might go 3.0 upper and fuel hat and bap down road, power is addicting, i am getting grapghs made to show comparisons of the 2 whipples, the pulls were at 6200 and my redline is 7000. Im running torco just to b safe. whats your numbers:laughing1:

[BurnTire]

My numbers are 10.62. LOL
I never been on a dyno.

[sicksnake]

:pinkthumb:nice numbers ive never been down track, im afraid too hook now with my shit halfshafts and my mickeys, will launch soft:woot2:

[wickedcobra]

This makes me want a whipple really bad..........Thanks for posting these pics, Ive been on the wagon for a while but this doesn't help :laughing:

[TruBluScreamer]

:drool5::drool5:

[BurnTire]

:pinkthumb:nice numbers ive never been down track, im afraid too hook now with my shit halfshafts and my mickeys, will launch soft:woot2:

Damn I pulled a ton of good 60ft times on ET streets or slicks with stock halfshafts.

Let her rip!!!!!!!

[wickedcobra]

Yeah, you should listen or stick a 10k rear end in it....:laughing:

[sicksnake]

:woot1:Got my numbers. 640hp and 598 tq, if i didnt dyno wit drags and had a bigger coolant tank for heat soak which robbed another 10 hp id be at 660, im happy:pepper:

[BurnTire]

:woot1:Got my numbers. 640hp and 598 tq, if i didnt dyno wit drags and had a bigger coolant tank for heat soak which robbed another 10 hp id be at 660, im happy:pepper:


Nice:twothumbsup:

[wickedcobra]

Niiiiice:highfive:

[Indy]

Good numbers :twothumbsup:

[4Jenna]

Awesome!!

[chewbaccajones]

:drool5::drool5:

+1.

What is different about the new gen whipple?

[Ruckus46gt]

see your from nj so what shop did you have dyno it? Also what other mods are on it and what size whipple? Doesnt look look a briefcase so guessing its not the 3.4

[sicksnake]

I have the 2.3 gen 2 which competes with the kb 2.6, the 3.4 is overkill for me.I had it dynoed at a shop called tt performance in clifton, which is primarily all chevy, but got lots of props though, was going to mustnag magic but was booked and tuner didnt get along them. I had rwtd do base tune and then kevin from wicked do dyno he is meticulous, most places 3 runs , i had like 8! and if weather permitted he wanted to drive data logging. My setup is ,Ford gt pumps, fuel mod upgrade, pprv delete kit, bassani headers,x and catback, jdm straight shot, 2600 maf, accufab tb, ngk plugs, plasma booster,canton coolant tanks, fluidyne radiator, spec 3 clutch, mgw,hr springs, 3.2 upper and 2# lower, reichard racing idler kit, motoblue 100mm top idler,xcal 3 with 2 tunes street and race for the torco, boost guage and a/f guage pillar mounted and a def must 315 mickeys awesome fn tire! and too many little things to remember.:pepper:I am def staying on this site, you guys are all real cool, will post more pics soon.

[sicksnake]

The new gen just has a new rotor profile which is supposed to be more efficient and give more boost.

[wickedcobra]

Sounds killer.......I will be upgrading to a whipple in a month or two. :biglaugh:

[dkg]

Nice ride, is TT performance in Clifton better than JDM in freehold.

[88BlownGT]

Very nice!