PDA

View Full Version : car wont start :(



silver03cobra
09-19-07, 06:15 PM
well I just got done putting on my LFP 2 lbs lower.. I started the car and pulled it out.. and parked it out side.... Came out next day.... All i got was a click when I tried to start it... so I thought battery... Well my charger says the batter is 100% charged...... I still just get a click not even a turn over.... can anyone help.. the car has under 29k miles and never had this problem... Could it be a fuse? HELP ME!!!!!

silver03cobra
09-19-07, 07:11 PM
tryed to rock it and pushed it alone... in 4th.. same thing.. help me!

vicious781
09-19-07, 08:28 PM
All I can suggest is to look backwards at what you did to the car and see if there is something you missed.

BurnTire
09-19-07, 08:51 PM
Throw a code?

silver03cobra
09-19-07, 09:56 PM
no code....... I have power at the engine fuse box.... but not at the starter...

could a wire be bad?

fazm
09-19-07, 09:56 PM
check to make sure the battery cables are perfectly tight. mustangs are picky about that, moreso then most cars.

silver03cobra
09-19-07, 09:59 PM
tight! super tight! just the way i like it... lol still nothing...

fazm
09-19-07, 10:00 PM
are you gettin power to the starter when someone else is hitting the key? its possible ur starter just took a shit.

silver03cobra
09-19-07, 10:02 PM
no power when i hit the key...... would starter go out under 30k miles? and out of no where

fazm
09-19-07, 10:25 PM
if ur gettin no signal at the starter when u hit the key, its not the starter.

ill have to check, but is the starter relay part of the ccrm on the cobra?

fazm
09-19-07, 10:29 PM
nope, its the middle of the 3 larger relays in the junction box.

have someone try to start the car, and put ur finger on the starter relay, check to see if its clicking. if not, then switch it with another relay that u know works (either a new one, or switch it with an exact match in the car). if still no clicking, then ur not getting power to the relay, which is fun to diagnose.

Dan
09-19-07, 10:32 PM
check your battery voltage

silver03cobra
09-19-07, 10:47 PM
14.7..... I had it on the charger it said 16.1

silver03cobra
09-19-07, 10:50 PM
nope, its the middle of the 3 larger relays in the junction box.

have someone try to start the car, and put ur finger on the starter relay, check to see if its clicking. if not, then switch it with another relay that u know works (either a new one, or switch it with an exact match in the car). if still no clicking, then ur not getting power to the relay, which is fun to diagnose.


nothing.... swaped with fog and wipper relay...

fazm
09-19-07, 10:58 PM
man sounds like fun :)

gotta find why ur not gettin power to the relay now. time to go over everything in the car.

when u try to start it, it clicks once right? if you immediaately try it again, does it click once again? or nothing?

silver03cobra
09-19-07, 11:05 PM
It will click all night long...... It sounds like the solenoid on the starter is clicking... cant tell

fazm
09-19-07, 11:10 PM
id say starter. if it only clicked once, and didnt again for a while, thats usually the battery connection, or corrosion on the cables.

and starters like to just die :)

have access to a power probe?

silver03cobra
09-19-07, 11:12 PM
well it is 85.00 for a new one at my shop... so how could i test it.. i hace some 1g weilding wire could i jump it? or bad idea?

Lucafu1
09-19-07, 11:22 PM
no you can jump it. did you pull the ground out maybe? also the power cable is right there near the lower.

Lucafu1
09-19-07, 11:23 PM
oh yeah push it down the street and pop the clutch....see if it will run.

silver03cobra
09-19-07, 11:25 PM
oh yeah push it down the street and pop the clutch....see if it will run.

that would be hard to do.... my drive way is rocks and the street is cactus... lol

silver03cobra
09-19-07, 11:27 PM

silver03cobra
09-20-07, 12:33 AM
I jumped it.... started up just fine......

tryed to start with out jumping..... nothing.

wire is dead....

Chris B.
09-20-07, 09:36 AM
Have you tried a different key? I had the chip in a key go bad once and the ignition would turn but it would not start. Everything worked but since the computer could not read the chip in the key it would not start.

Oops... never mind, missed the posts about it starting with a jump.

Lucafu1
09-20-07, 03:36 PM
the ground to the engine block near the mount and to the frame. ive seen them come apart. or the power wire to the starter. you can easily check both of those with a meter.