PDA

View Full Version : I might have toasted my engine



Gene
02-27-06, 01:40 PM
Sorry for the long post, I just need help out on this one. Well, took the car out yesterday to the track and made one pass on the juice. Hit the dirty in second and flet like an animal. I then went to shift into 4th and my car felt like the engine siezed. It just flat out stopped. My buddy said he saw a plume of black smoke when I grabbed 4th. I crused to the turn off lane with no power brakes or stearing. Parked it, popped the hood, my belt was still fine, checked for a gas smell on the dipstick and it was fine. Tried to start it again, wouldnt start. Sat there scratching my head for a few minutes checking vacuum lines and what not and all the major ones were in place. Started it up again and it ran. Drove it to the pit area and checked for codes, no codes. My vaccum was showing 17hg's and fuel pressure guage was normal. So I drove it home not getting into boost and looked it over when I got home. I noticed little cap that popped off of one of the red vacuum lines I capped for the egr delete. I recapped it and now I was pulling 18hg's of vacuum. Could this have caused it to bog and shut down? I'm going to log and beat the piss out of it tonight to see if it happens again. It just scared the piss out of me. The thing I can think of is that I could have had some major spark blow out and thats why it felt like it nosed over (ngk BR7EFS at .032) As soon as it felt shitty, the clutch pedal went in and tossed her in neutral. Perhaps when I went to hit the brakes it stalled? Other than that, I have no clue. I definitley need to run a compression and leak down test.

50 BMG
02-27-06, 02:19 PM
The thing I can think of is that I could have had some major spark blow out and thats why it felt like it nosed over (ngk BR7EFS at .032).

First thing I thought of. Hopefully that's what happened.


Perhaps when I went to hit the brakes it stalled?

SVC tunes tend to do that; myself and 2 others with SVC tunes have that problem. I forget what it's called, the idle air meter or some shit?


Anyway's, let us know how the compression test goes...

Gene
02-27-06, 02:51 PM
I dont thinks its correlated to svc tunes, I just think its indicative of the JLT 12" kit. Mine sometimes stalls on me as well, and I hope thats what happened when I let out. I need to buy all the shit for a leakdown and compression test though. Any one have the stuff already?

50 BMG
02-27-06, 05:30 PM
I dont thinks its correlated to svc tunes, I just think its indicative of the JLT 12" kit.

I know it's not the SVC thing, I just like to bitch. Bone stock Ford GT's are having stall problems due to the idle air gadgething.

The other 2 SVC cars I was referring to don't have the JLT CAI. Do you have a JLT 12" Gene?

Gene
02-27-06, 05:57 PM
Yes sir, I am ordering the revised reducer tomorrow. The one that doesn't look like a ****ing doughnut.

Radeon
02-27-06, 06:42 PM
Hey Gene. Time for Cams????

Screamn03
02-27-06, 09:51 PM
I'm not looking at lines or pics right now but could that cap coming off have caused the boost pressure to drop what the FRPS was seeing? I don't mean that the motor lost boost, what I mean is by having a leak maybe it caused a faulty reading to be read by the FRPS (assuming the line is shared).

Gene
02-28-06, 09:38 AM
Well, after beating the living piss out of it, its fine. I think I have my plugs gapped too much, I'm dropping them down to .028 I think the stall was just hitting the brakes hard when my idle was at 690, this could have caused the engine to bog and eventually shut off. I remember that I had powerbrakes after the incident for like a second, and then I lost them.

50 BMG
02-28-06, 10:25 AM
Yes sir, I am ordering the revised reducer tomorrow. The one that doesn't look like a ****ing doughnut.

Got a link/phone number and price?

Gene
02-28-06, 11:04 AM
I'll let you know as soon as JLT sends me a response. They stock them.