View Full Version : Speedworld June 1st (Licensing Passes)
TRUUBLE
05-24-07, 10:08 PM
I'm doing my licensing passes for my 9 second license June 1st. Anybody goin out that night?
I've been thinking about heading to the track, but I normally cann't make it out Friday night.
TRUUBLE
05-24-07, 10:37 PM
I've been thinking about heading to the track, but I normally cann't make it out Friday night.
Looks like you'll have to wait for the video . . . :tearsofjoy:
AZSonicSnake
05-25-07, 12:22 AM
hmmm....tempting. not sure if i will run, but tempting to go watch...
BurnTire
05-25-07, 04:07 AM
On my to buy list. Video Camera.
Good Luck tonight, cann't wait to see the vids.
TRUUBLE
05-25-07, 07:17 PM
Good Luck tonight, cann't wait to see the vids.
It's actually next Friday. I have a long to do list before I can make my passes:
1. Remove, re-angle, and reweld rear cage bars
2. Refit/replace swingout door bar
3. Install 4.30 gears (replacing 3.73s)
4. Install new pushrods so that restrictors can be removed from pan evac
5. Bump timing to 40 degrees from the current 36
6. Install MSD RPM switch for top end retard
7. Install new merge collectors and pan evac bungs
8. Have chassis certified
9. Install rear end girdle
10. Weld axle tubes
11. Install front mounted fuel cell
BurnTire
05-25-07, 07:23 PM
It's actually next Friday. I have a long to do list before I can make my passes:
1. Remove, re-angle, and reweld rear cage bars
2. Refit/replace swingout door bar
3. Install 4.30 gears (replacing 3.73s)
4. Install new pushrods so that restrictors can be removed from pan evac
5. Bump timing to 40 degrees from the current 36
6. Install MSD RPM switch for top end retard
7. Install new merge collectors and pan evac bungs
8. Have chassis certified
9. Install rear end girdle
10. Weld axle tubes
11. Install front mounted fuel cell
Sound like you need to get to work.
Do you have c clip eliminators or 9" ends on the 8.8?
TRUUBLE
05-25-07, 07:36 PM
Sound like you need to get to work.
Do you have c clip eliminators or 9" ends on the 8.8?
I'll git er done. I'm going to devote most of Sunday and Monday to it, then it goes to the chassis guy on Tuesday, gets certed Tuesday evening, and goes in for the gears on Wednesday morning.
I have C clip eliminators. Moser 31 spline axles and a Detroit Locker.
Sounds like a fun weekend.
TRUUBLE
05-25-07, 10:31 PM
Sounds like a fun weekend.
Yep. We're going Junior racin' tomorrow, then I get to concentrate on the car for a couple of days.
TRUUBLE
05-29-07, 10:11 PM
Well, the cage is redone and the car now has a shiny new NHRA 8.50 cert sticker :bounce:
The path is now clear for my licensing passes on Friday. The 4.30s go in tomorrow. :icon_cool:
BurnTire
05-29-07, 10:14 PM
Well, the cage is redone and the car now has a shiny new NHRA 8.50 cert sticker :bounce:
The path is now clear for my licensing passes on Friday. The 4.30s go in tomorrow. :icon_cool:
Cool. Have fun!
RockysMom
05-29-07, 10:15 PM
:youcandoit1:
Well, the cage is redone and the car now has a shiny new NHRA 8.50 cert sticker :bounce:
The path is now clear for my licensing passes on Friday. The 4.30s go in tomorrow. :icon_cool:
TRUUBLE
05-29-07, 10:16 PM
Cool. Have fun!
Thanks, Jeff.
There will (of course) be video of the licensing runs as well as a scan of my first 9 second time slip.
Now . . . a brief moment of silence for the 10s . . . . :Bucktooth:
TRUUBLE
05-29-07, 10:17 PM
:youcandoit1:
Gonna give it my best effort. :pinkthumb:
BurnTire
05-29-07, 10:20 PM
Thanks, Jeff.
There will (of course) be video of the licensing runs as well as a scan of my first 9 second time slip.
Now . . . a brief moment of silence for the 10s . . . . :Bucktooth:
LOL
If I wasn't on call Friday I would come out to watch. I could be tire pressure boy or something like that.:bounce:
TRUUBLE
05-29-07, 10:24 PM
LOL
If I wasn't on call Friday I would come out to watch. I could be tire pressure boy or something like that.:bounce:
I know you'll be there in spirit. I'll check my tire pressure in your honor . . :icon_cool:
BurnTire
05-29-07, 10:26 PM
I am just waiting for the nice Fall weather to come. Only 6 months to go.
TRUUBLE
05-29-07, 10:32 PM
I am just waiting for the nice Fall weather to come. Only 6 months to go.
I don't need no Fall wether. ALKY RULES!!!!!!!!!!!!!!!!!!!:woot1:
BurnTire
05-29-07, 10:33 PM
I don't need no Fall wether. ALKY RULES!!!!!!!!!!!!!!!!!!!:woot1:
I can still go fast in the heat. I don't like sweating my butt off in the staging lane.
TRUUBLE
05-29-07, 10:39 PM
I can still go fast in the heat. I don't like sweating my butt off in the staging lane.
Neither do I. So . . . . I just drop the top . . . :icon_cool:
BurnTire
05-29-07, 10:46 PM
Neither do I. So . . . . I just drop the top . . . :icon_cool:
Never thought of that. LOL
TRUUBLE
05-29-07, 10:50 PM
Never thought of that. LOL
That's my (valid) excuse for racing a vert.
Was it harder to build? You bet.
Am I glad I did it when everyone else is sweating their butts off? You bet.
Phx99Cobra
05-31-07, 02:42 PM
93mustank and i will be out there. I wont be running do to a bad clutch, but he will be running. See you out there.
TRUUBLE
06-01-07, 12:19 AM
93mustank and i will be out there. I wont be running do to a bad clutch, but he will be running. See you out there.
Excellent. See you there. :pinkthumb:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.