new to Nitrous! need help

[silver03cobra]

so I got this kit for a 5.0 it is a bunch of different miscellaneous components. Zex 10lb bottle, edelbrock fuel and nitrous solenoids, and an edelbrock series 2 nozzle. I'm putting it on my bbf 429. I will be retaining all of the 5.0 factory fuel injection. I have coast high performance EFI Spider plenum and fuel rails. With a C&L mass air. The motor is a:

1969 460 block
Steel 429 crank
440 dodge rods
Custom 13:1 forged pistons
Cam specs: dur@.50 I.272 E.282 Valve lift.665 Lobe sep.110 Solid Lifter
Ported DOVE heads
Stealth duel plane manifold

What i need to know is if the nozzle that i have is going to work, and, the jets that i have right now are .026 and 120, what does that mean?

[knuckles4696]

the nozzle will work in your app. only way it wouldnt would be if you had carburation in wich case you need a plate. It will go in your intake tube prefferably 3-6 inches from the throttle body. as far as the numbers, there jet sizes, if you call holley{nos} they can tell you what size shot they will give you.http://www.dynotunenitrous.com/store/scripts/installation_instructions/jet_calculator/nitrousjetcalc.asp

this is a good place to find out what jets you need for your desired shot anyways goodluck hope i helped.

[silver03cobra]

sweet! thanks!