PDA

View Full Version : H&R springs


silver03cobra
02-01-07, 10:11 PM
so i bought the sport springs.... do i have to have caster camber plates???
AZSonicSnake
02-01-07, 10:29 PM
anytime you lower a stang they should be used....only way to adjust the camber after its lowered...
BurnTire
02-01-07, 10:48 PM
so i bought the sport springs.... do i have to have caster camber plates???

A whipple would also be recommend anytime you lower the car. LOL
BLK03SVT
02-02-07, 09:21 AM
A whipple would also be recommend anytime you lower the car. LOL

You just justified my next purchase. Thank you!
BurnTire
02-02-07, 10:50 AM
You just justified my next purchase. Thank you!

Yep it you lower the car it is best to put a twin screw on. I mean it is only a few hours work to get the whipple installed. :yes:
Venomous Bite
02-02-07, 12:08 PM
I agree lowered cars need big blowers.
silver03cobra
02-02-07, 06:45 PM
ha ha ha ok jeff give me $2k and i will buy it all.
BurnTire
02-02-07, 07:43 PM
ha ha ha ok jeff give me $2k and i will buy it all.


LOL:icon_cool:
silver03cobra
02-06-07, 05:54 PM
so do i need the cc plates or can i wait for a 2 weeks?
BurnTire
02-06-07, 06:07 PM
Lowered will need aligned and the plates.
Torchmach
02-06-07, 06:30 PM
so i bought the sport springs.... do i have to have caster camber plates???

How low did you go Mon???

If you have lowered 1 1/2-2" youi will need CC plates. But 1" or less and you will be OK without.
BurnTire
02-06-07, 06:32 PM
I think the H&R's drop about 1.5 inches.
Torchmach
02-06-07, 06:36 PM
I think the H&R's drop about 1.5 inches.

You are getting into CC plate country with that much drop.
Derek@DRI
02-11-07, 08:54 AM
Yeah, you will need C/C Plates. Not immediatly but very soon. Let me know if you need some we can cut you a great deal on some.

Derek
50 BMG
02-11-07, 01:15 PM
A whipple would also be recommend anytime you lower the car. LOL

Huh? I must have it backwards...

The new K-Member and SRA is required when you lower the car.

Whipple or KB justification is when you snap your blower belt...
sicksnake
03-03-07, 06:42 PM
i have hr race springs that dropped my car 2" all around and didnt need any cc plates only offset steering bushings and alligned my car with much more negative camber than fords spec my car handles like its on rails:biglaugh: