Double0Fox's build

[Double0Fox]

Hey guys. First off I want to say how much I miss somewhere where the sun actually works, and comes out from time to time. My name is Chris, currently living in Covington Washington outside Seattle. This is my 2000 GT. This car has been through all kinds of "Plans" over the years, but currently going to go back to a Tork Tech set up. I say go back becouse about 3 years ago I bought the Tork Tech kit, and later sold it cause I was thinking about going with a Turbo/Auto setup. While the car was down my family, and I moved to Washington(from Oregon), and I once again changed what I wanted to do to the car. So I am a picture kinda guy, and I will just post up a boat load of pics of stuff already done to the car, and give descriptions as I go.

So my first power adder was N2O, never got to take it to the track, but had a little fun with it here, and there. I got the idea to mount it in the fenderwell, and use the antenna as the purge.

http://i63.photobucket.com/albums/h157/double0fox/IMG_2509.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_2510.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_2508.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_0007.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_2541.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_0168.jpg

Getting the 4:10's put in myself.

http://i63.photobucket.com/albums/h157/double0fox/IMG_0181.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_0188.jpg

Off Road X

http://i63.photobucket.com/albums/h157/double0fox/IMG_0165.jpg

Single Ford Gt supercar pump going in.

http://i63.photobucket.com/albums/h157/double0fox/IMG_2450.jpg

When I first bought the Tork Tech kit.

http://i63.photobucket.com/albums/h157/double0fox/IMG_3553.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_3559.jpg

Tearing into the stock 2V Longblock.

http://i63.photobucket.com/albums/h157/double0fox/IMG_3750.jpg

Getting the front drive belt assembly on. I have a ton of pics from the previous Tork Tech build, but since I am doing it again. I will save that fro the new one.

http://i63.photobucket.com/albums/h157/double0fox/IMG_3768.jpg

All done.

http://i63.photobucket.com/albums/h157/double0fox/Build/_MG_5400.jpg

http://i63.photobucket.com/albums/h157/double0fox/Build/_MG_5427.jpg

A few months later. My wife had a lapse in thinking strait, and told me I could build the engine. So......

http://i63.photobucket.com/albums/h157/double0fox/Build/IMG_5518.jpg

http://i63.photobucket.com/albums/h157/double0fox/Build/IMG_5527.jpg

At this point was hen I was thinking of building a Auto/Turbo car. So I bought forged internals @ 8.5 to 1 Compression(wish i had not done that), and a bunch more stuff.

Torque Box Reenforcments

http://i63.photobucket.com/albums/h157/double0fox/Build/IMG_5745.jpg

Moving the battery to the trunk.

http://i63.photobucket.com/albums/h157/double0fox/Build/IMG_5744.jpg

http://i63.photobucket.com/albums/h157/double0fox/Build/IMG_5656.jpg

Axles, Carbon Fiber Diff, bearings.

http://i63.photobucket.com/albums/h157/double0fox/Build/_MG_5626.jpg

Arp mains, and studs. New timing equipment.

http://i63.photobucket.com/albums/h157/double0fox/IMG_5860.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_6056.jpg

Trickflow 44cc Heads.

http://i63.photobucket.com/albums/h157/double0fox/IMG_5882.jpg

Edelbrock Intake, and Cobra hat, and Pumps.

http://i63.photobucket.com/albums/h157/double0fox/IMG_5878.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_6041.jpg

QA-1 K-Member, and UPR Coil Overs(crap)

http://i63.photobucket.com/albums/h157/double0fox/_MG_6084.jpg

http://i63.photobucket.com/albums/h157/double0fox/_MG_6085.jpg

[Double0Fox]

Also got 125lb valve springs.

http://i63.photobucket.com/albums/h157/double0fox/IMG_6064.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_6060.jpg

Sold the Cobra hat, and bought a Fore twin GT hat.

http://i63.photobucket.com/albums/h157/double0fox/IMG_6102.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_6106.jpg

60lb Injectors, and Duel FPDM.

http://i63.photobucket.com/albums/h157/double0fox/IMG_6090.jpg

http://i63.photobucket.com/albums/h157/double0fox/_MG_6088.jpg


K-Member in.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6095.jpg


Strange 10 Way adjustables.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6124.jpg


Fore hat is sooooo beautiful. Such a shame you never see it.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6121.jpg


Coil overs in.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6129.jpg


FPDM's in. Unfinished in this pic.

http://i63.photobucket.com/albums/h157/double0fox/IMG_6183.jpg

[Double0Fox]

Also bought a 6061.com Elbow for the Edelbrock, 75mm TB as well.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6216.jpg


http://i63.photobucket.com/albums/h157/double0fox/IMG_6219.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_9555.jpg


UPR Caster/Camber plates.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6214.jpg


PMAS blow through for the 60's.


http://i63.photobucket.com/albums/h157/double0fox/IMG_6866.jpg


Engine block waiting for a trip to the machinist.


http://i63.photobucket.com/albums/h157/double0fox/IMG_7052.jpg


New seat.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9581.jpg


Pistons.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9568.jpg


Battery wiring in the trunk.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9573.jpg


Getting there.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9594.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_9626.jpg


http://i63.photobucket.com/albums/h157/double0fox/IMG_9634.jpg


Mocked up. For those that wonder. I built it indoors, and rolled it out for pictures. I was working in a very small area, and couldn't stand far enough back for my camera to get it.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9640.jpg


In the car.


http://i63.photobucket.com/albums/h157/double0fox/IMG_9793.jpg


http://i63.photobucket.com/albums/h157/double0fox/IMG_0995.jpg


http://i63.photobucket.com/albums/h157/double0fox/IMG_0996.jpg


At this point I was about to order most of the Turbo equipment when I got a job offer In Kent, WA. So as much as I wanted to finish my car. My family always comes first. So just like that the car was covered, and off to Washington I went. My wife followed me up 2 weeks later, and my car sat for a while. So I am sure I probably left a whole lot out, but I will pick up off with what I am currently doing to her.

[BurnTire]

Very nice build.

[Jacostang]

Nice job!!!

[05mustangman]

Wow very impressive build!!! :thumbsup:

[Jodaddy]

Giggity!!

[4Jenna]

Nice!

[Double0Fox]

Thanks guys I will be updating this pretty soon.

[Double0Fox]

When I moved to Washington, it was suck a quick move we moved into an apartment. I never wanted to move back into a apartment, but you gotta do what you have to do sometimes. So while while my car sat outside in the rain. They didn't have covered parking spots, or garages.:icon_mad: Well with the car being un-tuned all the way I didn't drive it at all till I was ready to get tuned. Well of course at this time my back convertible window decides it wants to start leaking. Now I always looked at the car to make sure no one hit it, or broke into it, but I never thought to look to make sure the back window was not leaking. so the top has some water damage, and the lower torque boxes inside the car were un-treated so they stated to rust.

Ok so fast forward to about 3 months ago, it's now in a garage not getting rained on and such, and it is time for me to resume. So before I fully decided how I want to continue the car “purpose wise” ie.. Blower, Turbo, NA street, or as much power as I can get till it breaks again, there are some things I know I want to attend to no matter what route I take. One of them is the interior color. Since this is something I see everyday, this would be paramount. When I first bought the car with its parchment interior color from Ford, I thought “This is alright”. Then everyday the dirt build up that I could see was driving me nuts. Plus it didn't match the rest of the car style wise in my opinion. So I have decided to change it over to the Charcoal color interior. At this time I wanted to re-route the trunk mounted battery cables as well. Also I am going to be spraying the floor boards with a anti heat/sound/corrosion spray. Here are a few pics of the stock interior. Don't mind the mess.

http://i63.photobucket.com/albums/h157/double0fox/IMG_0998.jpg

http://i63.photobucket.com/albums/h157/double0fox/IMG_9569.jpg

I knew right away once I put the Corbeau seat in that something had to be done. I knew the big pain was going to be changing the dash out. So that was the first thing I bought. You would not believe me if I told you how many little pieces have to be changed that you don’t think about inside the car. One small difference from the stock Charcoal colored cars is I am going with a new Black carpet. Unlike the charcoal colored cars I think it will look a little better, since I think the charcoal carpet already looks “worn” due to the color. Here is a pick of when I had the dash out of the car. It had 36 connections attached to the back. That’s just electrical, and vacuum connections. Not the hardware that holds it in. It comes out in two stages. Bolts first, and then you have to gently pry it forward, while you contort yourself under the dash to the back to remove the electrical connections.
Sorry for the kinda blurry pics.

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7321.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7322.jpg

And here is the old dash out of the car. Actually quite heavier than you would think. They have a nice large metal cross member behind it.

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7323.jpg

Starting on the Charcoal dash.

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7544.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7547.jpg

You can already see the difference the Charcoal color makes against the Parchment door.

So even after all that, I started work on the engine bay. I removed the wiring harness, all of the upper intake down to the heads. Front accessories, and timing cover. Next I managed to remove both heads from the car, soak the floor in anti freeze(wonder if any cats are thirsty?), remove all the front timing components, and drop the exhaust. here is just a few pick along the way.

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7549.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7565.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7568.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7572.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7591.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7585.jpg

http://i63.photobucket.com/albums/h157/double0fox/New build 2013/IMG_7590.jpg

[Double0Fox]

[BigStang]

Great work, Thanks for sharing