PDA

View Full Version : Project Shelby 8.8 Diff brace cover


WildBill
07-05-11, 11:12 PM
Well, A board member brought me his Shelby diff cover and asked me to work my magic.
It's a nice cover, but dang it's ROUGH and has quite a bit of porosity and some silly angles!

Here are some before pics:
http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/0be98204.jpg

http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/a18ec55f.jpg

http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/3cb2aa29.jpg

It's should be finished tomorrow if something doesn't come up.
05mustangman
07-06-11, 02:38 AM
Well, A board member brought me his Shelby diff cover and asked me to work my magic.
It's a nice cover, but dang it's ROUGH and has quite a bit of porosity and some silly angles!

Here are some before pics:
http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/0be98204.jpg

http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/a18ec55f.jpg

http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/3cb2aa29.jpg

It's should be finished tomorrow if something doesn't come up.

Bill looking forward to seeing the after pics!
WildBill
07-13-11, 10:48 PM
tease!:rollingfloorrlol:

http://i67.photobucket.com/albums/h303/Mach1Marauder/DSC01135.jpg
WildBill
07-14-11, 11:20 PM
I finished the cover a bit ago with trying to find time to work on it.
I'm not super happy with it. The part had a lot of porosity problems and it was totally pissing me off, especially how nice the part could be if it didn't have the problem! DAMMIT!

Here's it all resurfaced and parts ground and wet sanded. No buffing yet.
http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/bfe309ea.jpg
http://i67.photobucket.com/albums/h303/Mach1Marauder/DETAILED%20CARS/584e208f.jpg

Here's it buffed out and polished. I'll prolly let it sit in the sun tomorrow to bake before the owner picks it up.

http://i67.photobucket.com/albums/h303/Mach1Marauder/DSC01138.jpg
http://i67.photobucket.com/albums/h303/Mach1Marauder/DSC01140.jpg

I took this so the Shelby logo comes out well.

http://i67.photobucket.com/albums/h303/Mach1Marauder/DSC01139.jpg