PDA

View Full Version : Emission Fail



Blackmagic1
04-08-11, 06:32 PM
1st time for emissions , an they said the car fails ! Car runs like a top ! No codes, no lights, yet "they' said, " The OBD 2 system is "Not Ready", as reported by the vehicles- on board computer." WHAT??? How can the "system" NOT be ready ?? Could it be the 16 yr old ,working there ? You only get 2 "inspections". Should I take it to a different station , or what ? Input please ??? (ran a test fer codes with my SCT scanner an showed NO codes)

Jacostang
04-08-11, 07:04 PM
Idiot at the emissions station??? Sometimes they dont have a clue...

02stangGT
04-09-11, 09:37 PM
make sure the car has ran a full drive cycle. did you unplug your battery prior to the emissions?

Blackmagic1
04-10-11, 09:54 AM
no,been drivin the car everyday. over 200 miles a week.

02stangGT
04-10-11, 10:25 AM
hmm. did you tune the car yourself or have a shop do it? and the emissions place shouldnt give you a fail if it says car is not ready because you didnt fail its, just not ready. i had the same problem took it to my tuner, and he hooked it up to a emission testeing machine and fixed it.

Blackmagic1
04-10-11, 11:45 AM
Keith tuned it at AZ Dyno chip

02stangGT
04-10-11, 05:51 PM
thats who did mine give a call!

WildBill
04-11-11, 11:18 AM
In general, if you have things turned off, the 05 up will not pass the test because it doesn't set a readiness test for that specific parameter.

Craig
06-01-11, 06:51 PM
I just got the same error, O2 sensors not ready. I guess when you have a performance tune done, they turn off the O2 sensors. I was not told that they'd be disabling my emmisions when I had this done. I wouldn't have done it, becuase now I'm being told they have to charge me to fix it. Granted, the tune and CAI were about 4 years ago, but again, I didn't know they were making it where my car can't even be emmisions tested!

Indy
06-01-11, 07:31 PM
Craig..... PM sent

Blackmagic1
06-01-11, 11:54 PM
My original tune was from Brenspeed. I found out it "cancels/turns off" the secondary o2 sensors ,so the emission test reads it as a "open loop". Keith installed his tune an it fixed everything...

billyboss
06-02-11, 08:22 AM
My tune was a brenspeed tune and I had no issues when I ran my 06 thru emissions

SloSVO
06-02-11, 11:30 AM
if you have the p1000 dtc in there.. it hasn't passed all the tests... there used to be a certain number that had to be cleared.. I don't know if now they all have to..