PDA

View Full Version : 2003 S/C Gt Stroker



Phx99Cobra
02-20-11, 12:35 PM
2003 Mustang Gt
White
S/C 302 Stroker
50,xxx Miles..engine has about 15k

Price is 16k obo....Call Andrew if Interested 623-694-9990......
....NO TRADES

The car has been my daily driver for the last year and a half. It runs great and the a/c works just fine. Most banks will not consider all the performance parts in the car on top of the normal value, so more than likely you will have to have cash on top of any loan. Also I can Include a PA AODE transmission in the deal with converter for an extra $1500. The tranny alone cost 3k. I have receipts for at least 30k in parts and probably with labor and other parts I don’t have papers for I would say around 40k total.

There are 2 programmed tunes on this car

RWHP on 109 octane – 610.79
RWTQ on 109 octane – 517.08

RWHP on 91 octane – 585….We lower this to 520 for my normal daily driving by dropping the timing.

Engine and Drivetrain

Block- Probe Stroker Kit
-Stock Cast Iron, Blue Printed and Balanced by Standard Machine
Bore
- 3.625
Stroke
- 3.75
Displacement
- 5.1 liter
Crank
- Probe Industries Forged Steel
Rods
- Probe forged 4340
Pistons
- Probe SRS forged, Total Seal Rings
Compression
-8.5 to 1

Cams
-Comp Cams xe 270 ah cams, Comp cams titanium retainers, Comp Cams beehive springs and Comp Cams adjustable cam gears

Heads
- Ford 2V Pi, ported and polished w / +1mm stainless valves, timeserted spark plug inserts flowed by Standard Machine
Fasteners
- ARP throughout
Oil Pan and Pump
- Milodon 8 quart, Melling High volume billet gears pump
Intake
- Trick flow track heat
Power Adder
- Procharger D-1sc 3.50 Pulley, 3 row intercooler
Throttle Body
- Accufab 70mm
Mass Air
- 3” Pro Tube, Anderson Powerpipe
Fuel Delivery
- Twin 10 pumps, sumped tank by Performance Solutions, kenne Belle Boost-a-pump, Aeromotive Fuel rails w/ return style system
Injectors
- 60-lb/hr
Headers
- JBA titanium shorties
Exhaust
- Bassani o/r x-pipe and cat back
Transmission
- TKO 500 converted to TKO 600 by putting in a 26 spline input
shaft, Bronze Syncros w/ pro 5.0 shifter
Clutch
- 11” / 26 spline Mcleod Disc Dual Performance Cobra, 11” Cobra Pressure Plate, Fidanza Aluminum Flywheel SFI, Firewall adjuster with quick release quadrant
Cooling
- Fluidyne aluminum radiator, Stewart high volume pump
Rear End
- 3.73, Ford diff gridle cover, Welded tubes, stock axles


Electronics

Engine Management
- Stock w/ performance solutions SCT tune
Ignition
- MSD Blaster COP
Gauges
- Autometer – Roush


Suspension and Chassis
Front Suspension
K-Member
- Stock
Control Arms
- Stock
Struts
- Tokico 5 way
Springs
- Eiback
Caster/Camber
- UPR
Brakes
- Baer 13” w/ ford 10 th anniversary calipers
Wheels
- American Racing- Redline 18x9


Rear Suspension
- Lakewood 50/50 shocks
Springs
- Eibach
Control Arms
- Steeda Upper and Lower
Brakes
- Baer 13.25 w/ ford 10th aniversery calipers
Wheels
- American Racing – Redline 18x10
Tires
- Nitto Drag Radial 305/35r18- 500 miles on them


Other
- NGK spark plugs installed around 45,xxx miles
- Extended wheels studs
- Drive shaft safety loop
- Lakewood SFI bell housing
- New Procharger Idler – Installed 46,xxx miles
- ATI super damper pulley – SFI Installed 45, xxx miles
- Full Length Sub Frame Connectors
- Battery Shut off Connection
- Optima Red Top battery – Bought 4 months ago

More Pics-- http://s279.photobucket.com/albums/kk143/Phx99Cobra/For%20Sale%202003%20Gt/

BLK03SVT
02-20-11, 12:47 PM
I followed this car on the way to work one morning down happy valley road. A nice clean GT that sounds awesome. Bump for a nice ride and good luck with the sale!

WildBill
02-23-11, 09:29 PM
Sweet car!
Dang shame to see you sell it.
A lot of blood, sweat and tears was put into this car when it was first built.

Phx99Cobra
03-24-11, 12:04 AM
Bump...NEW PRICE 16,000

Phx99Cobra
04-27-11, 09:50 PM
Bump NEW PRICE!!! 15,000