IMSHAKN
01-23-11, 02:41 PM
Going to be unloading the Mach 1 here in the next couple of months and wanted to see if there was any interest in it here before I just say screw it and trade it in...
2003 Mustang Mach 1 - manual trans - Azure Blue
-Currently has 67k original miles on it.
-Replaced the clutch 28k ago with a Ram Powergrab HD
-Full length subframe connectors welded in
-Torque boxes have been reinforced with battle boxes and been welded up professionally
-Drive Shaft Loop
-CHE upper control arms
-Megabite Jr Lower control arms
-Solid metal spherical bushings (does add noise to cabin, swapping to rubber will quiet it down to stock levels, but noise is not unreasonable at all)
-Built rear end(31 spline forged Strange axles, eaton tru trac, 4.10 Ford Racing gears)
-KYB adjustable shocks and struts
-Mac Stainless Steel exhaust, stock cats so no emission problems to worry about
-SLP line Lock
-Black FR500 Replicas, 9" in the front and 10.5" in the rear. Tires are under 50%
-Fiore Quick release quadrant and firewall adjuster
-K&N filter
-Phenolic 1/2" intake spacer
-Tune by Devin @ PSR
I'm looking for 11K as configured, but am willing to deal depending on how you want the car configured as I'm debating whether I will be putting a stock rear end back into it and other parts not listed have been returned back to stock form...
2003 Mustang Mach 1 - manual trans - Azure Blue
-Currently has 67k original miles on it.
-Replaced the clutch 28k ago with a Ram Powergrab HD
-Full length subframe connectors welded in
-Torque boxes have been reinforced with battle boxes and been welded up professionally
-Drive Shaft Loop
-CHE upper control arms
-Megabite Jr Lower control arms
-Solid metal spherical bushings (does add noise to cabin, swapping to rubber will quiet it down to stock levels, but noise is not unreasonable at all)
-Built rear end(31 spline forged Strange axles, eaton tru trac, 4.10 Ford Racing gears)
-KYB adjustable shocks and struts
-Mac Stainless Steel exhaust, stock cats so no emission problems to worry about
-SLP line Lock
-Black FR500 Replicas, 9" in the front and 10.5" in the rear. Tires are under 50%
-Fiore Quick release quadrant and firewall adjuster
-K&N filter
-Phenolic 1/2" intake spacer
-Tune by Devin @ PSR
I'm looking for 11K as configured, but am willing to deal depending on how you want the car configured as I'm debating whether I will be putting a stock rear end back into it and other parts not listed have been returned back to stock form...