El Jefe
10-10-10, 12:28 PM
Saw this on SVTP
Sorry guys, I was pretty busy last 6 weeks or so. We have 3 SEMA projects we are working on. I do still want to do this lip... we need someone in the Phoenix, Arizona area that doesn't mind us using their car to work off of for design and fitting. Preferably someone who will want one of these lips on their Terminator. I will start looking up photos of the Mach1 lip and also try to see what it looks like installed on a Termi.
Hi Brian! Yep send us a radio bezel and we will overlay it http://www.svtperformance.com/forums/images/smilies/orig/smile.gif
That is pretty much how i personally felt about the CobraR splitter/air dam... just too exagerated for street use. But before anyone flames me lol... i'm sure it's a fine lip for those who like the design.
And yep curb damage is a possibility with lowered cars and lips, and to have a functional splitter it can't be 7 inches off the ground, but I think this is more about the look and how well it holds onto the bumper without falling off.
That one guy with the 5 screws on the lip... yeah air pulled the lip down stripped out the screw holes from the sound of it. We would have to incorporate a backside brace made out of thick carbon fiber or aluminum to brace the lower edge of the factory Termi bumper. Not too hard to come up with a practical and good design for such a reinforcement part.
Whoever is interested in Arizona with doing this please contact me via PM... we can work out a deal on a new lip or something. We do lots of cf for these cars.
http://www.svtperformance.com/forums/terminator-talk-229/722970-splitter-air-dam.html
Sorry guys, I was pretty busy last 6 weeks or so. We have 3 SEMA projects we are working on. I do still want to do this lip... we need someone in the Phoenix, Arizona area that doesn't mind us using their car to work off of for design and fitting. Preferably someone who will want one of these lips on their Terminator. I will start looking up photos of the Mach1 lip and also try to see what it looks like installed on a Termi.
Hi Brian! Yep send us a radio bezel and we will overlay it http://www.svtperformance.com/forums/images/smilies/orig/smile.gif
That is pretty much how i personally felt about the CobraR splitter/air dam... just too exagerated for street use. But before anyone flames me lol... i'm sure it's a fine lip for those who like the design.
And yep curb damage is a possibility with lowered cars and lips, and to have a functional splitter it can't be 7 inches off the ground, but I think this is more about the look and how well it holds onto the bumper without falling off.
That one guy with the 5 screws on the lip... yeah air pulled the lip down stripped out the screw holes from the sound of it. We would have to incorporate a backside brace made out of thick carbon fiber or aluminum to brace the lower edge of the factory Termi bumper. Not too hard to come up with a practical and good design for such a reinforcement part.
Whoever is interested in Arizona with doing this please contact me via PM... we can work out a deal on a new lip or something. We do lots of cf for these cars.
http://www.svtperformance.com/forums/terminator-talk-229/722970-splitter-air-dam.html