6Jeff6
12-22-09, 01:53 PM
Motor is brand new, has been machine oiled but 0 miles
5.1 stroker
5 angle valve job Comp 791-16 titanium retainers (http://forums.corral.net/forums/showthread.php?t=1185206#)
Comp 26125-16 behive springs
SI SS valves (http://forums.corral.net/forums/showthread.php?t=1185206#) +1mm
valve seals
bronze/manganese valve guide
1628 comp cams
8.5 to 1 compression perfect for blower or nitrous
was setup for a kenne bell and would put you through the 1/4 sick quick with kenne bell
Listing of some of parts used:
arp head studs
arp main studs
7 qt canton oil pan
melling 1 inch oil pickup
performance mogul main and rod bearings
total seal stainless,gapless top rings
felpro gaskets
3 sticks of metal put in crank for balancing
aftermarket american made crank
H-beam rod 5.850 Length(early chevy)
Had to special fly cut pistons so valves would clear
Probe 18.1cc dish #10178 pistons
3.75 stroke
They call it a 5.1 stroker
This is straight from standard machine and roger(owner) would be more then happy to help you if you have any questions)
Website is http://www.standardmachinellc.com/ (http://www.standardmachinellc.com/)
Buyer pays shipping firm on price: $5,000.00. This is a steal for brand new everything!!!! I doubt you could even build one for just parts for this(porting,polishing,boring,balancing and building done at standard machine). Another words they did everything lol.:yes:
This motor is located in park falls wi... Pictures can be seen here 2009 down at bottom: http://www.dropshots.com/maiers#date/2009
Jeff
5.1 stroker
5 angle valve job Comp 791-16 titanium retainers (http://forums.corral.net/forums/showthread.php?t=1185206#)
Comp 26125-16 behive springs
SI SS valves (http://forums.corral.net/forums/showthread.php?t=1185206#) +1mm
valve seals
bronze/manganese valve guide
1628 comp cams
8.5 to 1 compression perfect for blower or nitrous
was setup for a kenne bell and would put you through the 1/4 sick quick with kenne bell
Listing of some of parts used:
arp head studs
arp main studs
7 qt canton oil pan
melling 1 inch oil pickup
performance mogul main and rod bearings
total seal stainless,gapless top rings
felpro gaskets
3 sticks of metal put in crank for balancing
aftermarket american made crank
H-beam rod 5.850 Length(early chevy)
Had to special fly cut pistons so valves would clear
Probe 18.1cc dish #10178 pistons
3.75 stroke
They call it a 5.1 stroker
This is straight from standard machine and roger(owner) would be more then happy to help you if you have any questions)
Website is http://www.standardmachinellc.com/ (http://www.standardmachinellc.com/)
Buyer pays shipping firm on price: $5,000.00. This is a steal for brand new everything!!!! I doubt you could even build one for just parts for this(porting,polishing,boring,balancing and building done at standard machine). Another words they did everything lol.:yes:
This motor is located in park falls wi... Pictures can be seen here 2009 down at bottom: http://www.dropshots.com/maiers#date/2009
Jeff